1 Orient Way,

Rutherford, NJ. 07070

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

1 Orient Way,

Rutherford, NJ. 07070

Professional Tips for a Very Easy Faucet Installation

Faucet Install: Plumber Professional Tips

The guidelines that can be found in the box with a brand-new faucet should inform you every little thing you need to recognize for a normal set up. Issue is, there’s no such thing as a normal set up because every job has its complications.


To get the solutions to the most usual problems, we sat with a pro local plumbing technician in [county], [region] who deals with these faucet instances daily. Utilize these expert pointers to make your faucet replacement a simple half-day job rather than an all-day ordeal.


DIY Faucet Installation

Discover the Origin of the Issue

If your faucet has weak pressure or flow, a brand-new faucet most likely isn’t the solution. Here’s how you can track down the origin of the problem:


  • If both the hot and the cold are weak, the aerator is most likely blocked. Simply remove it and wash it to solve the problem.
  • If either the hot or the cold (but not both) is weak, then defective supply lines, shutoffs, or supply pipelines are the problem. Supply hoses or shutoff valves are easy enough to change.


Taking care of defective or old plumbing is a larger job, however it can help some other components in the home that have low water pressure.

Measure Before You Buy

Before you pick a brand-new faucet, check the setup and spacing on your sink. If you have a three-hole setup, measure from the center of each handle to determine your spacing.


Standard spacing is usually 4 or 8 in. If you want a single-hole faucet but your sink includes three holes, no worry. Several faucets provide a cover plate to hide the other two holes.

Buy Everything You Assume You May Require

When you go to get your new faucet, bring a list of every possible set up product you might need. One trip to return a few items is much much easier than multiple runs to the home improvement store for the stuff you believed you would not need.

Get a Basin Wrench

Get a Basin Wrench

A basin wrench gets at impossible-to-reach nuts below the faucet. It will reach those tough nuts and handle nearly any other fitting you might run into throughout a faucet mount.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project.

Easy Faucet Insatallation-DIY

Install the Faucet First

If you’re installing a brand-new sink, mount the faucet to the sink prior to dropping the sink into place. Having everything in plain sight always makes for much better hookups– and the less time you spend on your back under that sink, the much better.

Examine the Shutoffs

Virtually every faucet is connected to shutoff valves underneath the sink. However those old valves often do not function, and it’s best to recognize that before you begin. If your shutoffs do not prevent the water flow, you can repair them or change them.


Or you could shut off the water to the whole property at the primary shutoff valve while you change the faucet.

Wipe Your Sink Deck

To make certain an excellent seal in between the sink and the new faucet, make sure to clean the footprint of the old faucet. Scouring powder works well for soap residue and waste.


For harder lime or corrosion deposits, a pumice rock is the most effective solution.

Use Plumber’s Putty

Use Plumber’s Putty

Some manufacturers suggest utilizing silicone caulk to secure a faucet or drainpipe, but beware: It can be tough to use and can tarnish natural rock. We choose plumber’s putty. It’s less complicated to use, and the non-staining variety will not leave blemishes.


It’s at the same time much less complicated to repair a faucet assembly that was mounted with putty. Silicone is as much an adhesive as it is a sealant and can make taking things apart tough.

Change Your P-Trap

Make space under the sink by taking out the P-trap. Reusing an old P-trap can be an unpleasant ordeal for your new sink mount. The price of a plastic P-trap kit is less than $5, and you’ll have peace of mind knowing all those installations are new and tidy.


Bear in mind that many bathroom sink drains pipes are 1-1/4 in., and cooking area sink drains pipes 1-1/2 in.

Change Your Supply Lines

Never reuse old supply lines. The last thing you want is water damages from a failed supply line. Even if the tubings are newer looking, it is advised to change them because the rubber washers can stop working over time.


Quality supply lines with a braided stainless steel housing might cost a bit extra (regarding $8 each), however they’re well worth it.

Get Leakproof Connections

Get Leakproof Connections

Each connection requires a different amount of torque to tighten up. Over-tightening the slip nuts on a plastic waste line can strip the threads and produce a leaking connection. Always hand-tighten these hookups.


For flexible supply lines, the basic tip is to get them to finger tight, then give them a quarter turn with a wrench.

Don’t Skimp on the Teflon Tape

A 40-ft. roll of Teflon tape sells for a few dollars, so do not be stingy with it. Ensure you cover all your threaded links clockwise a couple of times (3 ).


When you thread on that nut, it ought to really feel firm, and the clockwise wrap will maintain the tape from unraveling as you tighten up the connection. Teflon tape is just a lot more cheap insurance versus any type of leakages, so do not skimp.

Remove the Aerator and Flush Out Sediment

Remove the Aerator and Clear Out Sediment

Plumbing task knocks debris loose inside pipelines. Make certain that water-sediment doesn’t obstruct your aerator or valves. Remove the aerator and then allow both the hot and the cold run for a min to rinse the lines before reinstalling the aerator.

The Last Step: Check for Leaks

After every thing is connected and your water is back on, do a thorough leakage check. Clean it all down with a dry rag, and then blot your links with toilet tissue to see if there is any type of proof of a slow-moving leakage.


Learn to detect sneaky water leaks inside your home and prevent water damage and waste.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project

Proud to Install, Repair, and Service the Following Brands: