1 Orient Way,

Rutherford, NJ. 07070

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

1 Orient Way,

Rutherford, NJ. 07070

Clogged Sink? 6 Simple Strategies To Help

With a couple of household products and these basic steps, you can get to know just how to unblock a sink and save yourself a call to a plumber.

Clogged home kitchen sinks are amongst the most typical drain issues that house owners deal with. Fortunately, clogged drain pipes are also any of the most basic house repair work to perform by yourself.

When it comes to the kitchen sink, do not think Drano or other chemical-based drain cleaners are the quick solutions. Even though the blockage seems cleared, the chemicals can often do additional damage to your system.

Do not think of calling the plumbing professional ! There’s a likelihood you can repair the problem yourself with any of these 6 kitchen sink unclogging methods:

1. Attack with boiling water

When hair, grease, soap residue, and other dirt become obstructed in your drain, boiling water may be all that is needed to clear the blockage. It’s the most convenient solution, hence it should be your first choice when attempting to unblock a sink.

Here are the actions to take, which are as easy as 1-2-3:

  • Bring half a gallon of water to a boil on the range, or heat the water in a kettle.
  • Boiling water should be put immediately into the drain hole
  • Turn on the faucet and inspect to see if the water drains effortlessly. If it is still emptying slowly or standing still in the sink, repeat the method.

 

Very important: Do not attempt this method if your drain is linked to PVC pipes, as the boiling water may damage the plastic or melt.

If the boiling water fails to clear the blockage on the second attempt, it’s time to try another method. Regrettably, you have a sink blockage that is tough to the easy boiling water solution.

Some jobs are better left to the pros...

Sink still not draining? Get No-Commitment Estimates!

2. Examine the garbage disposal

It could be the source of your drain issues if you have a trash disposal in your sink. If the blockage remains in the garbage disposal, turning it on will normally break it apart.

 

Overheated or defective disposals may not even turn on, but you may quickly reboot them by pressing the reset button on the side or bottom of the machine. After resetting the disposal, reboot it to clear the blockage.

 

When you turn on the disposal, you may hear a low humming sound, which indicates that the machine is jammed or faulty. Before trying to fix your disposal, remember to shut off the electricity and never ever– and we mean never ever– place your hand in the disposal.

 

You can then attempt to break up the blockage in the disposal by manually turning the blades. Insert an Allen wrench into the opening on the bottom of the disposal and twist until you feel less resistance, indicating that the clog is breaking apart.

3. Plunge away the clog

As soon as you have actually confirmed that the waste disposal unit isn’t the issue, it’s time to take out the plunger. But keep in mind that, while you can utilize a toilet plunger if that’s all you have, Professional Plumbers suggest using a flat-bottomed one for the task.

With the plunger in hand, follow the following tasks:

  • Fill the sink with boiling water until it’s halfway full, forming a seal around the drain.
  • Put the plunger over the drain and rapidly pump up and down a number of times.
  • Remove the plunger and see whether the water drains.
  • Repeat this action until the water drains freely.

 

If the sink is still not emptying appropriately after several plunging efforts, you know what to do. It’s time to try our next method.

4. Break it down with baking soda and vinegar

This method is a more natural alternative to using chemical drain cleaners in order to unblock drain pipes. Baking soda and vinegar are more typical home items that you are most likely to have in your kitchen.

In order to enable the mix so as to perform its magic, follow these ways:

  • Using a cup or bowl, take out any standing water from the sink.
  • Pour one cup of baking soda down the drain, pushing the powder down with a spatula or spoon if required.
  • 1 cup of white vinegar ought to be poured down the drain.
  • Seal the drain opening with a stopper or cover.
  • Enable the mix so as to rest for 15 minutes.
  • Take off the cap and flush the drain with hot water.

 

This natural approach, like any other unclogging method, does not ensure success. If, after completing the steps, it appears like you are making progress on the blockage, repeat the steps.

5. Attempt the plumber’s snake

Blockages that resist will need using a plumber’s snake to clear the blockage. The tool has a spiral snake that is coiled and reaches down into the drain. When the snake enters into contact with an obstruction, crank the handle to break the trash and draw it out of the drain.

 

Electric snakes have even greater power to unblock drain pipes.

 

You can make one out of a wire coat hanger if you do not have a plumber’s snake. Just unwind the hanger into a long strand of wire with a pair of needle-nose pliers.

 

Keep the hooked end since it will be used to grab onto the dirt. If needed, utilize the pliers to modify the hook’s angle so that it fits quickly into the drain opening.

 

Whatever tool you’re using, just feed it a couple of feet at a time down the drain. You may accidentally press the blockage further down the pipeline if you press too hard.

 

When the tip of your tool enters into contact with an obstruction, hook it on and drag the dirt up into the drain.

Local Plumber-Sink P-Trap Diagram Plumbing

6. Clean the P-trap

If the water still does not drain easily, there could be an obstruction in the P-trap, which is the elbow-shaped pipe under your sink. Food, grease, and other debris may become stuck in the pipeline, leading to your sink to drain slowly or not at all as the water meets a snag on its way down.

 

The idea is to take off the pipeline and clean away the garbage that is clogging it. Caution: This task can get a little filthy, so arm yourself with goggles, towels, and gloves.

When you’re ready, clean the P-trap as follows:

  • Put a container under the pipe. When the P-trap is opened, this will collect any backed-up water or dirt that may fall out.
  • Loosen the trap connectors that connect the curved piece to the vertical and horizontal drain pipes. On either end of the P-trap, a slip nut ought to be present.
  • Remove the P-trap and scrub the pipe of any residue, dirt, or grime.
  • Reattach the trap. Turn on the faucet to clear the drain.

 

The block could be further up the pipe if the drain issue continues poor. You go back under the sink to locate the source of the blockage.

Here’s what you need to do:

  • Repeat the technique that takes off the P-trap.

 

  • The horizontal pipe that connects the system to the wall should be taken off.

 

  • Enter the wall pipe with a plumber’s coat, auger, or snake hanger. Utilize your tool to remove it from the pipe when you identify an obstruction.

 

  • Repeat the procedure until all debris has been removed.

 

  • Reassemble the pipes and P-trap by hand tightening the connectors. (A note of caution: Do not over tighten, as this may lead to the connectors to split).

 

  • Flush the drain with boiling water.

 

  • Examine under the sink while the water is running to be sure there isn’t any dripping from the pipes before you rejoice in your success.

 

If you do see leakages, double-check that all connectors are securely linked. As soon as you’re free of the drips, just dry any water spilled from under the sink or on the flooring, and you’re ready to go.

If you have actually gotten this far and your sink is still not draining, there could be a much bigger problem at hand. It’s time to quit and arrange an appointment with a plumber for a professional repair.

How to prevent future clogs

Now that your kitchen’s sink is draining correctly once again, make certain you’re doing something about it to minimize future clogs. The most important preventative measure is to avoid flushing harmful items down the drain.

This includes the following:

  • Grease, fats, and oils
  • Meats
  • Coffee grounds
  • Eggshells
  • Starchy foods, such as rice, pasta, or bread
  • Fruit peels, pits
  • Gum
  • Paint
  • Paper items, such as paper towels or food wrappers

 

Rather, pour frying oil into an old can and throw it after it’s full. Certain waste, such as coffee grounds, can be added to mulch or organic waste.

 

Plumbers additionally recommends that house owners not overload their garbage disposal. Prevent grinding more than one cup of food waste at a time, and, naturally, avoid getting rid of any of the above items.

 

Another great upkeep suggestion is to make an equal mix of vinegar and water and freeze it in an ice tray.

 

Grind a handful of the cubes down your garbage disposal once a month to scrape away food waste and keep the unit clean.

 

Running boiling water down the drain after each sink usage is another clever habit for the advantage of your pipes. You ought to additionally utilize a drain cover to trap debris before it triggers damage to the pipelines.

 

While clogged drains are a simple DIY project, being gotten ready for significant plumbing system concerns before they take place is often a smart plan.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project

Proud to Install, Repair, and Service the Following Brands: